7
Operation
Power Down
1. Safely bring vehicle to a complete stop.
2. Continue to depress and hold the vehicle service brake.
3. Select Neutral (N) mode using the transmission driver interface device.
Note: A solid “N” in the gear display indicates the transmission is in neutral
gear position.
NOTICE: Neutral gear position should always be achieved before initiating a
power down, except in cases of an emergency.
4. Set the vehicle parking brake.
WARNING: Apply vehicle parking brake and follow OEM parking instruc-
tions. Failure to follow these instructions could cause unintended vehicle
movement and may result in major vehicle component damage, property
damage, severe injury or death.
5. Key off.
!
To Next Page
Loading...
