Eaton ES Series - Fire Safety Interface Wiring Diagrams; Options R2 & F1 Wiring

8
Technical Data TD00801003E
Effective November 2011
Elevator Control ES Switch
EATON CORPORATION www.eaton.com
Typical Control with Wiring Options for Fire Safety Interface (Cont.)
Figure 5. Options R2 and F1
WHERE LOCAL ANTHORITIES HAVING JURISDICTION
PERMIT, FIELD REMOVAL OF THE BLUE WIRE
IDENTIFIED BY *+* MARKER WILL CHANGE THE
OPTION A SWITCH LOGIC, SEE THE AUXILARY
SWITCH LOGIC TABLE, REMOVAL HAS THE EFFECT
OF DISABLING THE BATTERY LOWERING DEVICE
WHEN THE SWITCH IS IN THE TRIPPED POSITION.
FIELD INSTALLER MUST ENSURE THIS MEETS ALL
LOCAL CODES BEFORE REMOVAL.
OPTION R2 & F1