Eaton EZ II Series - User Manual

Eaton EZ II Series

12 pages

To Next Page

To Next Page

Loading...

15 kV and 25 kV class EZ™ II splice installation instructions

(For A, B, and C cable ranges only)

COOPER POWER

SERIES

Splices

MN650007EN

Effective January 2016

Supersedes April 2015

Table of Contents

Questions and Answers:

K
Kim WhiteAug 10, 2025
What to do if Eaton Industrial Electrical unit will not close?
- I
  icarpenterAug 11, 2025
  If your Eaton Industrial Electrical unit won't close, ensure the yellow manual operating handle is fully up in the CLOSED position. Also, verify that all cables are properly connected. Finally, check the condition of the battery located in the control cabinet.
D
Deanna MillerAug 26, 2025
What to do if Eaton Industrial Electrical unit will not open?
- M
  Mr. Austin Ward Jr.Aug 26, 2025
  If your Eaton Industrial Electrical unit won't open, first check that all cables are properly connected. Also, check the condition of the battery located in the control cabinet.

Eaton EZ II Series Specifications

General

Brand	Eaton
Model	EZ II Series
Category	Cables and connectors
Language	English

Related product manuals

Preview: Eaton 600 A T-OP II

Eaton 600 A T-OP II

Preview: Eaton GridAdvisor Series II

Eaton GridAdvisor Series II

Companion II back-up current-limiting fuse

Preview: Cooper Power RTE EL-BAY-O-NET FUSE

Cooper Power RTE EL-BAY-O-NET FUSE

Tandem ELF Current-Limiting Dropout Fuse

200 A Fused Loadbreak Elbow Connector Replacement Fuse

Eaton KPA-1043-1

Preview: Eaton NZM1 Series

Eaton NZM1 Series

Preview: Eaton 600 A PUSH-OP

Eaton 600 A PUSH-OP

Preview: Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 35 kV class PUSH-OP

Preview: 600 Ampere Deadbreak Junction 25 kV Class

600 Ampere Deadbreak Junction 25 kV Class