10
Operation
Driving Tips
• Always select an initial starting gear that provides sufficient reduc-
tion for the load and terrain.
• Always use normal double-clutching procedures when making lever
shifts.
• Never slam or jerk the shift lever to complete gear engagements.
• Never coast with the shift lever in the neutral position.
• Never move the range lever with the shift lever in neutral while the
vehicle is moving.
• Never make a range shift while moving in reverse.
• Never downshift at too high of a road speed.
• In most cases, depending on the engine and axle ratios, you can save
valuable fuel by operating the vehicle at less than governed RPM
while cruising in top gear.
• Never move the shift lever to the LO speed gear position while oper-
ating in HI range.
• Never make a splitter shift while moving in reverse.
• Do not lug engine below peak torque (1200 r.p.m.).
To Next Page
Loading...
