16
Service and Maintenance
Lubrication
Proper lubrication procedures are the key to a good all-around maintenance
program.
Eaton® Fuller® Transmissions are designed so that the internal parts operate
in an oil circulating bath created by the motion of the gears and shafts.
All parts will be properly lubricated if these procedures are closely followed:
• Maintain oil level. Inspect regularly.
• Follow maintenance interval chart.
• Use the correct grade and type of oil.
• Buy from a reputable dealer.
For additional lubrication information, see TCMT-0021.
Maintain Proper Oil Level
Make sure oil is level with the filler opening. Being able to reach oil with your
finger does not mean oil is at proper level. (One inch of oil level is about one
gallon of oil.)
When adding oil, never mix engine oils and gear oils in the same transmis-
sion.
Oil Level
Improper Oil Level
Hole
Proper Oil Level
Hole
To Next Page
Loading...
