General Information
Warnings and Cautions
Read the entire driver instructions before operating this transmission.
Set the parking brakes before starting a vehicle, always be seated in the
driver’s seat, move the shift lever to neutral, and depress the master clutch.
If engine cranks in any gear other than neutral or without the master clutch
depressed, service your vehicle neutral safety start circuit immediately.
Before working on a vehicle or when leaving the cab with the engine running,
place the transmission in neutral, set the parking brakes, and block the
wheels.
Do not release the parking brake or attempt to select a gear until the air pres-
sure is at the correct level.
When parking the vehicle or leaving the cab, always place the shift lever in
neutral and set the parking brakes.
If your vehicle is equipped with a remote throttle, before operation, the trans-
mission must be in neutral.
TOWING: To avoid damage to the transmission during towing, disconnect the
driveline.
Every effort has been made to ensure the accuracy of all information in this manual. However,
Eaton Truck Component Operations makes no expressed or implied warranty or representation
based on the enclosed information. Any errors or omissions may be reported to Marketing Ser-
vices, Eaton Truck Component Operations, P.O. Box 4013, Kalamazoo, MI 49003.
Copyright Eaton Corporation, 2001. All rights reserved.
To Next Page
Loading...
