Eaton GridAdvisor Series II Service Instructions

iiiFIELD SERVICE INSTRUCTIONS MN285009EN April 2019
Contents
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY ................................... II
SAFETY FOR LIFE .........................................................................iv
SAFETY INFORMATION ....................................................................iv
Safety instructions .............................................................................. iv
REQUIRED PARTS & MATERIALS ............................................................ 1
SUGGESTED TOOLS & SUPPLIES ............................................................ 1
PRE-ARRIVAL TASKS ....................................................................... 3
PROCEDURE .............................................................................. 3
1. PREPARE UNIT FOR SERVICE AND VERIFY PARTS ........................................ 3
2. PERFORM THE SWITCHGEAR APPARATUS FUNCTIONAL TEST ............................. 4
3. IF APPLICABLE: REMOVE THE CABLE CABINETS ......................................... 6
4. REMOVE THE SIDE COVER NUT-GUARDS ............................................... 7
5. REMOVE THE COVER FASTENERS ..................................................... 7
6. REMOVE THE COVER ................................................................ 8
7. REMOVE THE COVER GASKETS ....................................................... 8
8. CLEAN THE FLANGES ............................................................... 9
9. INSTALL NEW GASKETS ............................................................. 9
10. PREPARE THE COVER FOR REINSTALLATION ............................................11
11. REINSTALL THE COVER ............................................................. 12
12. PERFORM A LEAK TEST ............................................................. 13
13. APPLY TOUCH-UP PAINT TO THE COVER BOLTS ......................................... 16
14. REINSTALL THE SIDE COVER NUT-GUARDS ............................................ 16
15. IF APPLICABLE: REINSTALL THE CABLE CABINETS ...................................... 16
16. REPEAT THE SWITCHGEAR APPARATUS FUNCTIONAL TEST ...............................17

Eaton GridAdvisor Series II Specifications

General

Brand	Eaton
Model	GridAdvisor Series II
Category	Cables and connectors
Language	English