Eaton i-on30EX - Redirecting Speech Messages

i-on40 & i-onEX Range 4. Administration
Page 103
9. Press .
The display shows:
Followed by a series of progress
messages:
(Press  if you decide you want to
abandon the call.)
The control unit calls the installer's
computer on the number you
selected.
Your system may be connected to
Downloader for several minutes.


When Downloader has finished and
the connection is broken the
display shows the time and date.


Redirecting Speech Messages
Note: This option is available only if you have the a speech dialler module
fitted inside the control unit and it has been programmed by the
installer. You can use the About menu to check if you have a
communication module fitted, see page 106.
If you need to re-direct speech messages to new telephone numbers then:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .


6. Press  until the display shows:


7. Press .

