Eaton i-on30EX - Page 49

i-on40 & i-onEX Range 4. Administration
Page 43
2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


5. Press .


6. Press  .


7. Press  .
The bottom line of the display
shows the first in a list of the users
already programmed.


8. Press  or  to display the user
you wish to edit.
(Alternatively, if you already know
their user number, you can key
that in and the display will show
that user immediately.)


9. Press  .
The bottom line shows:


10. Press  until the display shows:


11. Press .


12. Press  or  to scroll through the
list of partitions.
On the bottom line of the display
“Yes” means that the user is
assigned to the partition, “No”
means that the user is not assigned
to the partition.

