Eaton i-on30EX - Page 52

4. Administration i-on40 & i-onEX Range
Page 46
confirmation tone. The keypad
display shows:


If a user forgets their code then a Master or Admin user must delete that
user from the system (see page 55), and recreate a new user with a new
code (see page 52).
Proximity Tags
No user can change or delete any other user’s proximity tag. (A Master
User or Admin User can register a proximity tag for a new user when they
first add the user to the system, see page 52.) Any user except a Guard or
Set Only user can register a tag for themselves as follows:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


If you are a Master or Admin User:
(otherwise go to step 6)
5. Press .


a) Press .


b) Press .


c) Press  or . until the bottom
line of the display shows your own
user name or number.


d) Press .


e) Press  or . until the bottom
line of the display shows:


f) Go on to step 8.