i-on40 & i-onEX Range 4. Administration
Page 59
b) Press again to turn the sirens
off.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
8. Press when you have finished
this test.
The display shows:
9. Press .
The display shows the next item in
the list of tests.
a) Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
The control unit turns on the wired
sirens. Check that you can hear
them.
b) Press again to turn the sirens
off.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
11. Press when you have finished
this test.
12. Press .
The display shows the next item in
the list of tests.