Eaton i-on30EX - Page 87

i-on40 & i-onEX Range 4. Administration
Page 81
To program the events:
20. Starting from where we finished
adding the exception:


21. Press  until you see:


22. Press .
The display shows:


23. Key in a name to remind you of the
event, for example:


24. Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


25. Key in the time at which the event
should take place, for example:


26. Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


27. Press  until the display shows a
day on which you want the event to
take place.
In the example the first day is
Monday:


28. Press  to change the “No” to a
“Yes”:


29. Repeat steps 27 and 28 for all the
days you want the event to occur
on.
In the example this is Monday
through to Friday


30. Press .
The keypad gives a double “beep”

