Eaton i-on30EX - Page 99

i-on40 & i-onEX Range 4. Administration
Page 93
e) Press  when you have
finished making the changes you
want.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


12. Press  twice.
If you want to program other user
remotes repeat steps 8 to 11.


13. Press  repeatedly to leave the
menu when you have finished.
Re-assigning FOB-2W-4B Partitions
When a user adds a FOB-2W-4B two way keyfob to the system, the control
unit assigns the device to all the partitions belonging to the user. If a Master
or Admin user subsequently reassigns the user to different partitions, then
the user themselves must change the partitions controlled by their two way
keyfob.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


If you are a Master or Admin User:
(otherwise go to step 6)
5. Press .


a) Press .


b) Press .


c) Press  or . until the bottom line
of the display shows your own user
name or number.

