Eaton i-on50EX - 5 Technical Specification; General; Capacities; Security

i-on50EX/EXD
Page 37
5. Technical Specification
General
Product name
i-on50EX.
Product
Description
50 zone hybrid endstation with
remote keypads.
Manufacturer
Eaton’s Security Business.
Environmental
Class II.
Operating
temperature
Tested -10 to +55°C.
Humidity
0 to 93% RH, non-condensing.
Case material
Steel.
Dimensions:
Control unit
320 x 400 x 98, mm HxWxD.
i-kp01
115 x 156 x 30, mm HxWxD
KEY-
K01/KP01/KPZ01
128 x 128 x 29, mm HxWxD
EXP-W10, EXP-
WCC, EXP-R10,
EXP-R30
230 x 144 x 44, mm HxWxD
Weight:
Control unit
4.9 kg (without stand-by
battery).
i-KP01
0.26 kg
KEY-K01
0.19 kg
KEY-KP01
0.19 kg
KEY-KPZ01
0.19 kg
EXP-W10,
EXP-WCC,
EXP-R10, EXP-
R30
0.42 kg
0.43 kg
0.39 kg
0.39 kg
Capacities
Zones
50 max (with expanders)
Outputs
16 plug-by communicator
outputs on control unit, plus
50 max for the rest of the
system.
Expanders and
Wired Keypads
20 max devices (see note 1)
Radio Keypads
5 max (two per radio expander)
External Radio
Sirens
5 max (two per radio expander)
WAMs
5 max (two per radio expander,
repeater mode only)
Loudspeakers
1 on control unit, one per
expander
Plug on
communication
modules
One
Other ports
1 x USB, 1 x Ethernet
Partitions
5 (see note 2)
Calendar Set
Timers
5 max
Log capacity
Up to 750 events: 500
mandatory events, 250 non-
mandatory. Stored in EEPROM
memory, available for at least 10
years without power.
Internal Clock
±10 minutes over one year.
User Codes
100 (plus installer code)
Remote controls
100 (one per user)
Radio Hold Up
Devices
100 (one per user)
Proximity tags
100 (one per user)
Notes:
1. Wired keypads, wired zone expanders, and
radio zone expanders are all bus devices. You
can connect any combination of these devices
to the bus.
2. The system can be used as EITHER a
partitioned system OR a part setting system.
When used as a part setting system there are
four setting levels available: Full Set and Part
Sets B, C and D.
Security
Security Grade
Grade 2 or 3
Radio detector
differs
16,777,214 (2
24
-2).
Radio
Supervision
Programmable.
Number of
access codes
100 plus one installer
Access code
differs
10,000 differs with 4 digit
codes.
1,000,000 differs with six digit
codes.
All digits may be any number 0
to 9.
Code blocking
Blocked for 90s after four
incorrect codes in series.
Proximity tag
differs
4,294,967,296 (2
32
)
Power Supply
This product complies with the requirements of EN50131-6
Type A power supply at Grade 3 and environmental class 2.
Power supply type
A
Mains power supply
requirements
230VAC +10%/-15%,
170mA max, 50Hz.
Total power supply
capacity:
1.5A
(of which 750mA is used
for battery recharge and
750mA is available for
powering the system).
12V Aux supply*:
500mA max
12V Bell supply
500mA max
Comms power
supply*:
400mA max
12V Expander Bus*:
400mA max
LS connectors
280mA in alarm.
*Note: The ratings given here represent the
maximum current that can be drawn before
triggering over-current protection.