Eaton Magnum DS Series - Magnum DC Switch Family Overview

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. IL019116EN / Z18392
July 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Installation guidelines for users of Magnum DS
Low-Voltage Front-Access Switchgear Assemblies
for seismic applications
Instructional Leaet IL019116EN
Effective July 2016
Detail A
A
1/2-inch tie-down
hardware
Rear frame floor brace
(shipped installed on gear)
a b
Figure 7. Magnum switchgear front-access rear frame seismic floor brace information
a
Secure enclosure to pad with Grade 5 hardware.
b
Sufficient clear space, between the wall and the rear of the switchgear, should be provided to allow for proper attachment of the switchgear to the pad.