Need help?Do you have a question about the Eaton MTL4511 and is the answer not in the manual?
Compliance with regulations, zone classification, and protection against stresses.
Specific requirements for Zone 2 installations, enclosures, and wiring.
Description of Digital Input modules, functions, LFD, and phase reversal.
Description of Digital Output modules for controlling on/off devices in hazardous areas.
Description of Analogue Input modules for 4/20mA or HART transmitters.
Description of Analogue Output modules for driving loads in hazardous areas.
Description of modules accepting thermocouple or RTD inputs.
Precautions for safe live maintenance of intrinsically safe devices and systems.
Step-by-step procedure for diagnosing and troubleshooting module faults.
Information on using MTL4500 in Zone 2/22 hazardous areas per ATEX Directive.
Compliance with regulations, zone classification, and protection against stresses.
Specific requirements for Zone 2 installations, enclosures, and wiring.
Description of Digital Input modules, functions, LFD, and phase reversal.
Description of Digital Output modules for controlling on/off devices in hazardous areas.
Description of Analogue Input modules for 4/20mA or HART transmitters.
Description of Analogue Output modules for driving loads in hazardous areas.
Description of modules accepting thermocouple or RTD inputs.
Precautions for safe live maintenance of intrinsically safe devices and systems.
Step-by-step procedure for diagnosing and troubleshooting module faults.
Information on using MTL4500 in Zone 2/22 hazardous areas per ATEX Directive.
General| Number of Channels | 1 |
|---|---|
| Location of Safe Area Device | Safe area |
| Mounting | DIN rail |
| Protection Rating | IP20 |
| Location of Field Device | Hazardous Area |
| LED Indicators | Power |
| Operating Temperature | -20°C to +60°C |
| Weight | 150 g |
To Next Page
