Need help?Do you have a question about the Eaton MTL4514 and is the answer not in the manual?
Key safety and installation precautions to observe, including wiring segregation.
Instructions for mounting backplanes using surface or DIN-rail kits.
Guide to making safe-area signal and power supply connections to backplanes.
Procedures for physically installing modules onto backplanes securely.
Step-by-step guide for troubleshooting common issues and identifying faulty modules.
Procedures for bench testing Digital Input modules and their outputs.
Procedures for bench testing Digital Output modules, including loop-powered and relay types.
Procedures for bench testing Analogue Input modules and measuring current imbalance.
Procedures for bench testing Analogue Output modules for current transfer accuracy.
Key safety and installation precautions to observe, including wiring segregation.
Instructions for mounting backplanes using surface or DIN-rail kits.
Guide to making safe-area signal and power supply connections to backplanes.
Procedures for physically installing modules onto backplanes securely.
Step-by-step guide for troubleshooting common issues and identifying faulty modules.
Procedures for bench testing Digital Input modules and their outputs.
Procedures for bench testing Digital Output modules, including loop-powered and relay types.
Procedures for bench testing Analogue Input modules and measuring current imbalance.
Procedures for bench testing Analogue Output modules for current transfer accuracy.
General| Supply Voltage | 20 to 35V DC |
|---|---|
| Mounting | DIN rail |
| Location of Transmitters | Field or Safe Area |
| Hazardous Area | ATEX, IECEx, UL, CSA |
| Output | 4-20 mA |
| LED Indicators | Power indication, channel status |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +80°C |
| Humidity | 5 to 95% RH |
| Approvals | ATEX, IECEx, UL, CSA |
| Input | 4-20 mA |
To Next Page
