Need help?Do you have a question about the Eaton MTL4516 and is the answer not in the manual?
Personnel qualifications and general safety principles for ATEX environments.
Instructions for installing equipment in compliance with ATEX regulations.
Specific requirements for using equipment in Zone 2 hazardous areas.
Guidance on making safe-area signal and power connections.
Procedures for physically mounting modules onto backplanes.
Safety measures and considerations during maintenance.
Systematic steps for diagnosing and troubleshooting issues.
Procedures for performing bench tests on DI modules.
Procedures for performing bench tests on DO modules.
Procedures for performing bench tests on AI modules.
Personnel qualifications and general safety principles for ATEX environments.
Instructions for installing equipment in compliance with ATEX regulations.
Specific requirements for using equipment in Zone 2 hazardous areas.
Guidance on making safe-area signal and power connections.
Procedures for physically mounting modules onto backplanes.
Safety measures and considerations during maintenance.
Systematic steps for diagnosing and troubleshooting issues.
Procedures for performing bench tests on DI modules.
Procedures for performing bench tests on DO modules.
Procedures for performing bench tests on AI modules.
General| Supply voltage | 20 to 35V DC |
|---|---|
| Mounting | DIN Rail |
| Resolution | 16-bit |
| Power Supply | 20 to 35V DC |
| Enclosure Rating | IP20 |
| LED indicators | Power |
| Operating temperature | -20 to +60°C |
| Humidity | 5 to 95% RH (non-condensing) |
| Accuracy | ±0.1% of full scale |
| Communication Interface | RS-485, Ethernet |
To Next Page
