Need help?Do you have a question about the Eaton MTL4517 and is the answer not in the manual?
Crucial safety directives for ATEX compliance and installation procedures.
Specific safety and handling precautions during installation.
Methods for physically mounting backplanes (surface, DIN-rail, rack).
Making signal and power supply connections to the backplane.
Steps to prepare modules before installation, including switch settings.
Steps for physically installing modules onto the backplane.
Explanation and setup of the Line-Fault Detection (LFD) feature.
Specific details and operation of the MTL4501-SR fail-safe interface.
Details and operation of the MTL4504 switch/proximity detector interface.
Description and modes of the MTL4510/MTL4510B digital input modules.
Details of MTL4521/MTL4521L loop-powered solenoid alarm drivers.
Details of MTL4523L loop-powered solenoid alarm driver with LFD.
Details of MTL4523V/VL voltage-controlled solenoid drivers.
Details of MTL4524 solenoid driver with override input.
Details of MTL4524S solenoid driver with 24V override.
Details of MTL4525 solenoid driver with override input.
Details of MTL4526 switch operated relay module for IS circuits.
Details of the MTL4531 vibration transducer interface for signal monitoring.
Details of the MTL4532 pulse isolator for high pulse rates and fast response.
Steps for diagnosing and resolving operational faults.
Crucial safety directives for ATEX compliance and installation procedures.
Specific safety and handling precautions during installation.
Methods for physically mounting backplanes (surface, DIN-rail, rack).
Making signal and power supply connections to the backplane.
Steps to prepare modules before installation, including switch settings.
Steps for physically installing modules onto the backplane.
Explanation and setup of the Line-Fault Detection (LFD) feature.
Specific details and operation of the MTL4501-SR fail-safe interface.
Details and operation of the MTL4504 switch/proximity detector interface.
Description and modes of the MTL4510/MTL4510B digital input modules.
Details of MTL4521/MTL4521L loop-powered solenoid alarm drivers.
Details of MTL4523L loop-powered solenoid alarm driver with LFD.
Details of MTL4523V/VL voltage-controlled solenoid drivers.
Details of MTL4524 solenoid driver with override input.
Details of MTL4524S solenoid driver with 24V override.
Details of MTL4525 solenoid driver with override input.
Details of MTL4526 switch operated relay module for IS circuits.
Details of the MTL4531 vibration transducer interface for signal monitoring.
Details of the MTL4532 pulse isolator for high pulse rates and fast response.
Steps for diagnosing and resolving operational faults.
General| Location of Field Device | Hazardous Area |
|---|---|
| Location of Control Equipment | Safe Area |
| HART Communication | Supported |
| Supply Voltage | 20 to 35V DC |
| Mounting | DIN Rail |
| Number of Channels | 1 |
| Hazardous Area Certification | ATEX, IECEx |
| Output | 4 to 20mA |
| Housing | Plastic |
| Input | 4/20mA from safe area |
To Next Page
