12
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Figure 7. Opening the Parameter screen.
Figure 8. Multi-frame Setting window..
•
Drive Voltage would correspond to the voltage rating of
the drive in which it is going to be installed.
•
Drive Current Rating would correspond to the current
rating of the drive in which it is going to be installed.
•
Motor/Line Frequency will correspond to the line
frequency of the facility in which it is being put.
•
Drive Application will select the desired application to be
used on the drive depending on the intended use.
•
If option cards will be used, select the desired option
cards and slots in which they will be inserted.
When Set becomes active, it may be pressed to advance to
the Start-up Wizard screen or can press “No” to close the
Multi-frame window.
To Next Page
Loading...
