To Next PageTo Next Page
Need help?Do you have a question about the Eaton PowerXL DC1 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Relative Humidity | 5% to 95% (non-condensing) |
| Rated Current | 6A |
| Control Method | PWM |
| Protection | Overcurrent, Overvoltage, Short Circuit, Overtemperature |
| Communication Protocols | Modbus RTU |
| Cooling Method | Convection cooling |
Summary of amendments introduced in previous manual revisions.
Defines the intended audience and required technical knowledge for using the manual.
Explains the symbols, formatting, and conventions used throughout the manual.
Lists and defines the abbreviations commonly used within the manual.
Explains the rated operating voltages and tolerance ranges for DC1 drives.
Details unit conversion examples between SI and US-American units.
Overview of the DC1 PowerXLT™ variable frequency drives and their applications.
Illustrates the main components of a DC1 variable frequency drive system.
Instructions on verifying the contents of the received product package.
Details voltage categories and how to interpret nameplate data.
Identifies elements on IP20 protected DC1 drives (FS1 size example).
Identifies elements on IP66 protected DC1 drives (FS1 size example).
Describes the core functionalities and capabilities of the DC1 series drives.
Guides users on selecting the appropriate DC1 drive based on motor and supply requirements.
Defines the intended industrial applications and limitations of DC1 drives.
Recommends regular checks and maintenance tasks for DC1 drives.
Specifies recommended ambient conditions for storing the DC1 variable frequency drive.
Details the procedure for safely recharging DC link capacitors after extended storage.
Provides information on contacting support and warranty claims.
A checklist to ensure all requirements are met before operating the frequency converter.
Highlights critical safety warnings and dangers associated with operating the device.
Guides on starting the drive using factory-configured control signal terminals.
Instructions for commissioning IP66 rated DC1 drives using their integrated local controls.
Details how to configure and operate the drive using the integrated keypad.
Explains how to configure and control the drive via field bus or SmartWire-DT.
Describes the keypad elements and their functions for drive configuration.
Outlines methods for selecting and setting drive parameters.
Provides a comprehensive list of all available parameters with their descriptions.
Details how to configure digital and analog inputs using parameter P-15.
Explains the function of digital and analog inputs based on parameter settings.
Describes how to view operational data and status indicators on the drive's display.
Explains the drive's internal monitoring functions and error detection.
Describes how error messages are stored and read from parameter P-13.
Lists failure codes, possible causes, and corrective measures for errors.
A detailed list of all drive parameters, their IDs, access rights, values, and descriptions.
