Need help?Do you have a question about the Eaton PowerXL DC1 Series and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Enclosure Rating | IP20 |
| Communication Protocols | Modbus RTU |
| Cooling Method | Air-cooled |
| Protection | Overcurrent, overvoltage, undervoltage, short circuit, overtemperature |
| Communication Interface | RS-485 |
| Operating Temperature | -10°C to +50°C |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
Details CAUTION, WARNING, and DANGER levels for user safety.
Details the voltage categories and rated operational data for the DC1 drives.
Outlines the essential criteria for selecting the correct variable frequency drive.
Recommends regular checks and maintenance measures for DC1 drives.
Explains how to connect DC1 drives to different AC supply systems (TN-S, TN-C, TT).
Covers safety precautions related to fuses, cable cross-sections, and switching devices.
Addresses electromagnetic compatibility requirements and measures for DC1 drives.
Provides recommendations and considerations for selecting and connecting motors.
Provides guidance on installing the variable frequency drive in suitable enclosures.
Details measures for achieving EMC-compliant installations.
Covers essential earthing procedures and requirements for system safety.
Provides instructions for all electrical wiring and connection work.
Explains how to connect the power section terminals for supply and motor.
Guides on connecting control cables to the drive's control section terminals.
Details procedures for performing insulation resistance tests on cables and motors.
Provides a checklist to ensure all requirements are met before operating the drive.
Highlights crucial safety warnings and hazards during operation.
Explains how to set parameters using the operating unit or software.
Covers the configuration of digital and analog input modes and functions.
Details how digital and analog inputs are configured based on parameter settings.
Explains how to define the control level for the DC1 variable frequency drive.
Covers motor selection and configuration based on the rating plate data.
Lists and explains the configurable braking functions available for the drives.
Describes how to monitor motor current using relay or analog outputs.
Lists and explains the Modbus parameters for DC1 variable frequency drives.
Describes the Modbus RTU operating mode and data transfer format.
Details how to map Modbus registers for accessing drive data.
Lists essential parameters that require configuration for CANopen operation.
Provides a table of failure codes, causes, and corrective measures for error messages.
Presents general technical data, standards, and environmental ratings for the drives.
Provides detailed technical specifications for different DC1 models.
Provides guidance on selecting appropriate cables and fuses according to standards.
To Next Page
