3 Installation
3.5 Electrical Installation
58 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
3.5 Electrical Installation
CAUTION
Carry out the wiring work only after the variable frequency drive
has been correctly mounted and secured.
DANGER
Electric shock hazard - risk of injuries!
Before carrying out any wiring work (qualified personnel only),
make sure that the system is fully de-energized. Make sure to
follow the safety rules on pages I and II.
NOTICE
Fire hazard!
Only use cables, circuit-breakers, and contactors that feature
the indicated permissible nominal current value.
DANGER
The components in the variable frequency drive's power section
remain energized up to five (5) minutes after the supply voltage
has been switched off (intermediate circuit capacitor discharging
time).
Pay attention to hazard warnings!
..
￫
Perform the steps below with the specified insulated tools and
without using force.
To Next Page
Loading...
