Eaton PowerXL DC1 Series - 1 DC1 device series

1 DC1 device series
1.1 Introduction
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com 11
1 DC1 device series
1.1 Introduction
Due to their ease of use and high reliability, DC1 PowerXL™ variable
frequency drives are ideal for general applications involving three-phase
motors. In addition, an integrated radio interference suppression filter and a
flexible interface ensure that the inverters meet a number of important
needs in the machine building industry when it comes to the optimization of
production and manufacturing processes.
For installations in control panels, devices with a performance range
of 0.37 (for 230 V) to 11 kW (for 400 V) are available in a compact and
sturdy design featuring three available sizes (FS1, FS2, FS3) and a degree
of protection of IP20.
For distributed local installations, there are three sizes covering a perfor-
mance range of 0.37 (for 230 V) to 7.5 kW (for 400 V) and featuring a degree
of protection of IP66. These models come in two versions: with and without
local controls. These local controls include a setpoint potentiometer, a
selector switch for switching operating directions, and a lockable main
switch on the mains side.
The computer-based drivesConnect parameter configuration program
ensures data integrity and reduces the time required for commissioning and
maintenance.
In addition, the comprehensive accessories available increase the inverters'
flexibility in all areas of application.
IP20 degree of protection IP66 degree of protection, without
local controls
IP66 degree of protection, with local
controls
Figure 1: Designs, enclosure versions

L1/L
L2/N
L3

U
V
W
1
2
3
4
5
6
7
8
9
10
11
PWR
OFF
ON
REV
FWD
0