0 About this manual
0.1 List of revisions
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com 7
0 About this manual
This manual contains specific information designed to enable you to select a
DC1 variable frequency drive, connect it, and use its parameters to configure
it as required for your specific needs.
The manual applies to all DC1 variable
frequency drive sizes. Any differences between and special characteristics of
the various rating levels and sizes will be noted accordingly.
0.1 List of revisions
The following significant amendments have been introduced since previous
issues:
0.2 Target group
The content of MN04020003Z-EN manual is written for engineers and elec-
tricians. A specialist knowledge of electrical engineering and fundamental
technical principles is needed for commissioning. We assume that you have
a good knowledge of engineering fundamentals and that you are familiar with
handling electrical systems and machines, as well as with reading technical
drawings.
0.3 Writing conventions
Symbols with the following meaning are used in this manual:
Indicates instructions to be followed.
0.3.1 Hazard warnings of material damages
Publication
date
Page Subject New Modification Deleted
12/13 Completely revised
✓✓
10/12 Initial issue
NOTICE
Warns about the possibility of material damage.
To Next Page
Loading...
