Eaton PowerXL DC1 Series - 1.4 Rated operational data

1 DC1 device series
1.4 Rated operational data
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com 15
1.4 Rated operational data
Voltage categories
DC1 variable frequency drives are subdivided into the following mains
voltage categories:
• 115 V: DC1-1D…
• 230 V: DC1-12…, DC1-32…
• 400 V: DC1-34…
1.4.1 Rated operational data on the nameplate
The device-specific rated operational data for the DC1 variable frequency
drive is listed on the nameplate on the right side of the device.
The inscription of the nameplate has the following meaning (example):
Inscription Meaning
DC1-344D1FB-A20N Part no.:
DC1 = DC1 series variable frequency drive
3 = Three-phase mains connection / three-phase motor connection
4 = 400 V mains voltage category
4D1 = 4.1 A rated operational current (4-decimal-1, output current)
F = integrated RFI filter
B = integrated Brake Chopper
A = LED display (7-segment text display)
20 = IP20 degree of protection
N = basic device
Input
Rated operational data of mains connection
Three-phase AC voltage (U
e
3~ AC),
380 - 480 V voltage, 50/60 Hz frequency, input phase current (4.3 A).
Output
Load side (motor) rated operational data:
Three-phase AC voltage (0 - U
e
), output phase current (4.1 A), output frequency
(0 - 500 Hz)
Power
Assigned motor output:
1.5 kW at 400 V/2 HP at 460 V for a four-pole, internally cooled or surface-cooled
three-phase asynchronous motor (1500 min
-1
at 50 Hz/1800 rpm at 60 Hz)
S/N
Serial number
variable frequency drive is an electrical apparatus.
Read the manual (in this case MN04020003Z-EN) before making any electrical
connections and commissioning.
IP20/Open type
Degree of protection of the housing: IP 20, UL (cUL) Open Type
25072012 Manufacturing date: 25.07.2012
a