Eaton PowerXL DC1 Series - Designations for the Elements in Variable Frequency Drives with an IP20 Degree of Protection

1 DC1 device series
1.5 Designations for the elements in variable frequency drives with an IP20 degree of protection
18 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
1.5 Designations for the elements in variable frequency drives with an IP20 degree of protection
The following drawing serves as an example showing the designations used
for the elements in DC1 variable frequency drives with a size of FS1 and an
IP20 degree of protection.
Figure 6: Designations (IP20)
a Fixing holes (screw fastening)
b Connection terminals in power section (mains side)
c Cutout for mounting on mounting rail
d Connection terminals in power section (motor feeder)
e Control signal terminals (plug-in)
f Communication interface (RJ45)
g Operating unit with 5 control buttons and LED display
h Info card
L1/L
L2/N
L3
U
V
W
1
2
3
4
5
6
7
8
9
10
11
⑧
⑦
⑥
⑤
①
②
③
④

