Eaton PowerXL DC1 Series - DX-Com-Pckit

11 Annex
11.9 PC-Interface cards
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com 195
11.9.2 DX-COM-PCKIT
Figure 107: Equipment supplied with DX-COM-PCKIT
Instructional leaflet
Driver software
Cables
The DX-COM-PCKIT computer interface can be used to establish wired
communications between a DC1 variable frequency drive and a computer
running a Windows operating system (point-to-point connection).
￫
For more information on the DX-COM-STICK Bluetooth commu-
nication stick, please refer to manual MN040003EN,
"drivesConnect ·
Parameter Configuration Software for
PowerXL™ Variable Frequency Drives."
CD
￫
The equipment supplied with the DC1 variable frequency drive
does not include a DX-COM-PCKIT computer interface.
￫
For more information on the DX-COM-PCKIT connection cable,
please refer to manual MN040003EN, "drivesConnect · Param-
eter Configuration Software for PowerXL™ Variable Frequency
Drives."
6
345
21
PWR
USB
RxD
Serial
SW
TxD