5 Parameters
5.5 Digital and analog inputs
DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com 99
5.5 Digital and analog inputs
Parameter P-15, which depends on P-12, is used to configure the inputs'
function and mode of operation.
Parameter P-12 is used to define the control level for the device. If this
control level changes, the inputs' function and mode of operation may
change as well.
The following tables show how parameter P-15 depends on parameter P-12.
￫
DI3 can become AI2; AI1 can become DI4.
￫
For the button commands, please note that stop commands are
run as N/C contact commands.
To Next Page
Loading...
