11 Annex
11.10 Expansion modules
198 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
11.10.1.1 Technical Data
11.10.1.2 mounting
Technical Data S y m b o l Unit Value
Input voltage
DXC-EXT-IO110 U V 100 - 10 % - 120 + 10 %, 50/60 Hz
(90 - 132 ± 0 %, 48 - 62 Hz ± 0 Hz)
DXC-EXT-IO230 U V 200 - 10 % - 240 + 10 %, 50/60 Hz
(180 - 264 ± 0 %, 48 - 62 Hz ± 0 Hz)
High signal
DXC-EXT-IO110 % 80 - 250 , R
i
≈ 68 kΩ
DXC-EXT-IO230 80 - 250 , R
i
≈ 68 kΩ
Operation temperature °C 0 - +50
Storage temperature °C -40 - +60
Degree of protection IP00
￫
For detailed instructions on how to install the expansion
modules, please refer to instructional leaflet IL04012016Z.
NOTICE
Internal relay K1 is looped with the expansion module, meaning
it can conduct a lower current ( 1A).
DANGER
Dangerous voltage!
Expansion modules DXC-EXT-IO110 and DXC-EXT-IO230 must
not be placed into operation until all mounting and installation
work has been completed. Any other use will be considered to
be an inappropriate use.
￫
The control signal terminals on the DC1 variable frequency drive
are plug-in terminals. They can be screwed onto the expansion
module in order to cover the pins (protection against contact).
To Next Page
Loading...
