Eaton PowerXL DC1 - 5.3 List of parameters

5 Parameters
5.3 List of parameters
96 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
5.3 List of parameters
The abbreviations used in the parameter lists have the following meaning:
Figure 60: Parameter Access
PNU
Parameter number
ID Identification number of the parameter
RUN Access rights to the parameters during operation (RUN):
/ = Modification permissible,
- = Modification only possible in STOP
ro/rw
Parameter read and write permissions via a fieldbus connection (BUS):
ro = read only
rw = read and write
Value • Parameter settings
• Value ranges
• Display values
WE
Default settings
Page Page in this manual with additional configuration and application examples
for the parameter
￫
The first time the device is switched on, as well as any time
after restoring its default settings, only basic parameters P-01 to
P-14 will be shown. To access the extended parameter set,
enter 101 (= WE and P-37) for parameter P-14.
P-01
P-02
P-03
P-14 101
P-01
P-02
P-03
P-14
P-15
P-16
P-53