Eaton SVX9000 User Manual

SVX9000 Drives
Quick Start Guide
Effective November 2011
Supersedes December 2003
CONTENT
STEP 1 — Keypad Operation Overview
STEP 2 — Standard Wiring Diagrams and Connections
STEP 3 — Start-Up Wizard
STEP 4 — Operating and Programming Menu
Navigation
STEP 5 — Faults and Warning Indication
STEP 6 — Monitoring Menu
MN04003009E.fm Page 0 Wednesday, November 9, 2011 8:47 AM

Eaton SVX9000 Specifications

General

Enclosure Type	NEMA 1, NEMA 12
Communication Interface	Modbus, Profibus, Ethernet
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Cooling Method	Air-cooled, Liquid-cooled
Enclosure Rating	IP54

Summary

STEP 1 Keypad Operation Overview

SVX9000 Drive LCD Status Indicators

Explains indicators on the SVX9000 drive's LCD display.

SVX9000 Drive LED Status Indicators

Details the meaning of various LED indicators on the drive.

SVX9000 Drive Keypad Navigation Buttons

STEP 2 Standard Wiring Diagrams and Terminal Locations

SVX9000 Drive Power and Motor Wiring Schematic

Illustrates the power and motor wiring connections for the SVX9000 drives.

SVX9000 Drive Default I/O Configuration

Details the standard default input/output configuration for the drives.

STEP 3 Start-Up Wizard

SVX9000 Drive Start-Up Wizard Configuration

Outlines the sequence of steps for the drive's initial setup wizard.

STEP 5 Faults and Fault Codes

SVX9000 Drive Fault Directory and Codes

Lists fault codes and their corresponding descriptions for troubleshooting.