Eaton SVX9000 - STEP 3 Start-Up Wizard; SVX9000 Drive Start-Up Wizard Configuration

SVX9000 Drives MN04003009E—November 2011 www.eaton.com 6
STEP 3
Start-Up Wizard
If the wizard is not enabled at power-up, press the STOP button for 5 secs.
to enable it.
Accel. Time 1
“3.0” s
Decel Time 1
“3.0” s
Current Limit
“3.30” A
Motor NP Volt
“460” V
Motor NP Freq
“60.00” Hz
Motor NP Speed
“1720” rpm
Motor NP Current
“2.20” A
Power Factor
“0.85”
Loc. Ctrl. Place
“Keypad”
Input Phase Supv
“Fault, Coast”
Repeat Setup?
<No Yes>
Rem. Ctrl. Place
“I/O Terminal”
Local Reference
“Keypad”
Remote Reference
“AI1”
Startup Wizard
“Press Enter”
Language
“English”
Application
“Standard”
3 – 5 Seconds Wait
Setup Starts
“Press Enter”
Min. Freq
“0.00” Hz
Max. Freq
“60.00” Hz
Setup Done
Press Enter
Copy Parameters
<No Yes>
Up to Keypad
<No Yes>
Up to Keypad
Wait
Output Frequency
“0.00” Hz
MN04003009E.fm Page 6 Wednesday, November 9, 2011 8:47 AM