Eaton SVX9000 - STEP 5 Faults and Fault Codes; SVX9000 Drive Fault Directory and Codes

SVX9000 Drives MN04003009E—November 2011 www.eaton.com 16
STEP 5
Faults and Fault Codes
Code/Fault Directory
Fault
Code Fault
Fault
Code Fault
Fault
Code Fault
1 Overcurrent 16 Motor
overtemperature
40 Device unknown
2 Overvoltage 17 Motor underload 41 IGBT temperature
3 Ground (Earth)
Fault
22 EEPROM
checksum fault
42 Brake resistor
overtemperature
5 Charging Switch 24 Counter fault 43 Encoder fault
6 Emergency stop 25 Microprocessor
watchdog fault
44 Device change
(different type)
7 Saturation trip 26 Startup prevented 45 Device added
(different type)
8 System fault 29 Thermistor fault 50 Analog input I
in
< 4 mA (for the
signal range 4 to
20 mA)
9 Undervoltage 31 IGBT temperature
(hardware)
51 External fault
10 Input line
supervision
32 Fan heat sink 52 Keypad
communication
fault
11 Output phase
supervision
34 CAN bus
communication
53 Communication
bus fault
12 Brake chopper
supervision
36 Control unit 54 Slot fault
13 SVX9000
undertemperature
37 Device change
(same type)
56 PT100 board
temperature fault
14 SVX9000
overtemperature
38 Device added
(same type)
— —
15 Motor stalled 39 Device removed — —
MN04003009E.fm Page 16 Wednesday, November 9, 2011 8:47 AM