17
Step 3 - Keypad overview
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Main keypad buttons
Buttons description
Table 3. Keypad buttons.
Icon Button Description
Local/Remote Local/Remote:
Switches between LOCAL and REMOTE control for start and speed reference. The control
locations corresponding to local and remote shall be selected within an application.
Start Start:
This button operates as motor start button for normal operation when the “Keypad” is selected as the active
control source. When Keypad is the reference place after hitting the start button, it will jump directly to the
Keypad Ref Screen.
Stop Stop:
This button operates as motor stop button for normal operation when the “Keypad” is selected as the control source and
keypad stop button is active, or stop button is always enabled regardless of control source.
•
Motor stop from the keypad.
Up
Down
Up and Down arrows:
•
Move either up or down a menu list to select the desired menu item.
•
Editing a parameter bit by bit, while the active digit is scrolled.
•
Increase/decrease the reference value of the selected parameter.
•
In parameter page when in read mode, move to the previous or next brother parameter of this parameter.
Left/Back/Reset Left arrow:
•
Navigation button, movement to left when editing a parameter digit by digit.
•
Backs up one step.
•
At Main Menu page by hitting Back/Reset takes to Default Page.
Back/Reset:
This button has three integrated functions. The button operates as backward button during normal mode. In edit
mode, it is used as cancel operate. It is also used to reset faults when faults occur.
•
Backs up one step
•
Cancels Modify in edit mode
•
Resets the active faults (all the active faults shall be reset by pressing this button more than 2s in any page)
•
Hold Stop and Back Reset for 5 seconds to return drive to factory default
•
At Main Menu page by hitting Back/Reset takes to Default Page.
To Next Page
Loading...
