Eaton PowerXL DM1 Series - Page 21

19
Step 3 - Keypad overview
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Menu navigation - main keypad
This section provides basic instruction on navigating each
section in the menu structure from the main keypad.
Figure 16. Main keypad menu navigation.
Left (Reset) / Right /OK key
M - Monitor M1 - Standard Monitor M1.1 - Output Frequency
M2 - IO Status
M6 - PI Monitor
Up key
Down key P - Parameters P1 - Basic Parameters P1.1 - Min. Frequency P1.1 - Min. Frequency
P2 - Inputs
P2.1 - Basic Settings
P2.2 - Digital Input
P2.3 - Preset Speed
P2.4 - AI Settings
P3 - Outputs
P3.1 - RO1 Function
P3.3 - Analog Output
P4 - Drive Control P4.1 - Basic Settings
P5 - Motor Control P5.1 - Basic Settings
P6 - Protections
P6.1 - Motor
P6.2 - Drive
P6.3 - Communications
P6.4 - Auto Restart
P7 - PI Control
P7.1 - Basic Settings
P7.2 - Setpoint
P7.2.1 - Standard
P7.2.2 - Setpoint 1
P7.3 - Feedback 1
P11 - Serial Communications
P11.1 - Basic Settings
P11.2 - Modbus RTU
P11.3 - BACNET MSTP
P11.4 - SA Bus
P11.5 - SWDT
P11.6 - Bluetooth
P12 - Ethernet Communications
P12.1 - Basic Settings
*
P12.2 - Modbus TCP *
P12.3 - Ethernet I/P & BACNET I/P
*
P12.4 - Web UI
*
P13 - System
P13.1 - Basic Settings
P13.2 - Keypad
P13.4 - Version Info.
P13.5 - Application Info.
*
= DM1 PRO Only.