7
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Reference version
Power Xpert inControl Installation
Install Power Xpert inControl, DTM for DM1 and BLE
Communication DTM using One Installer.
DM1 Bluetooth Parameters
•
P11.22 [Blue Tooth Enable] = Enabled
• (P11.6.1 on keypad)
•
P11.48 [Blue Broadcast Mode] = On
• (P11.6.2 on keypad)
Power Xpert inControl
•
Open inControl
•
Add Eaton BLE Comm DTM in Network View
•
Select Eaton BLE Communication in Network view and
add PowerXL DM1 Device DTM in network view.
•
Connect.
• Toolbar or right-click context menu.
To Next Page
Loading...
