Eaton PRC-E Series - Page 27

23
LCD touchscreen display programming
PRC-E Series Instruction Manual MN014003EN August 2015 www.eaton.com
Overriding all the breakers in an
individual panelboard
ote:N A panelboard “Override OFF” will turn “OFF”
all controllable circuit breakers in the selected
panelboard. If there are controllable circuit breakers
that must be left “ON” for any reason, an individual
controllable circuit breaker override should be done
instead of a panelboard override.
From the “Main Menu” screen, tap the “Breakers” button.
This will display the “Breakers / Select Panelboard” screen.
Tap the panelboard button of the preferred panelboard,
This will display the “Breakers” screen for the selected
panelboard.
Override ON panelboard
ote:N An “Override ON” button will override “ON” all
controllable circuit breakers in selected panelboard.
If there are controllable circuit breakers that must be
left “OFF” or in-service for any reason, an individual
controllable circuit breaker override should be done
instead of a global panelboards override.
Tap “Override ON” button to initialize all controllable circuit
breakers handles in the panelboard selected to the “ON”
position.
All circuit breaker buttons on the LCD display should have
a red background with yellow borders after the “Override
ON” command. If some of the backgrounds are green, see
the “Breaker Button Indications” section of this guide for
further information.
You may also visibly verify that all controllable circuit breaker
handles are in the “ON” position.
ote:N The yellow “Override” LED on the PRC controller will
illuminate indicating an override is active.
Override OFF panelboard
ote:N An “Override OFF” button will override “OFF” all
controllable circuit breakers in selected panelboard.
If there are controllable circuit breakers that must be
left “OFF” or in-service for any reason, an individual
controllable circuit breaker override should be done
instead of a global panelboards override.
Tap “Override OFF” button to override “OFF” all the
controllable breakers in selected panelboard.