Eaton PRC-E Series - Page 64

60
Web page programming
PRC-E Series Instruction Manual MN014003EN August 2015 www.eaton.com
Manual control of a group
There is also a manual ON/OFF control of a group.
Double-click the group name button.
This opens the group “Point Status” screen.
This screen displays the group point address, name and the
current feedback status. The PRC2000E will also display
BACnet Priority Array as shown above.
To turn ON the group, click the “ON” button.
The group status will show “ON”.
To turn OFF the group, click the “OFF” button.
The group status will show “OFF”.
Adding controllable circuit breakers to a group
Click the “Associate Loads” button on the “Groups” screen.
The lower pane of the Web page will list all the discovered
circuit breakers. The listing order is odd numbered circuit
breakers are listed first then the even numbered are listed.
To associate a circuit breaker to a group, click the selected
group name.
The background of the selected group turns blue and the
name of the group displays at the top of the screen.
Click the checkbox beside the selected circuit breaker(s)
to add a checkmark to associate the circuit breaker(s) to
the group.
The number of circuit breakers associated will be displayed
at the top of the Web page.