Eaton XN300 - 17.2 Technical data for digital outputs

17 Digital output module XN-322-16DO-P05
17.2 Technical data for digital outputs
111 XN300 slice modules 02/24 MN050002EN Eaton.com
17.2 Technical data for digital outputs
Quantity 16
Short-circuit proof as per EN 61131-2 Yes
Power supply for digital outputs
Number of supply voltages 2 (clamp positions +1/+2)
Rated operating voltage U
e
24 Vdc
admissible range 18 – 30 VDC
Residual ripple  5%
Maximum permissible total current for all
channels when using a duty factor of
100%
8A
Protection against polarity reversal no
Output characteristic data
„1“ signal
Output voltage (U
e
- 1V) < U
a
< U
e
Output current per channel 0.5 A
„0“ signal
Output voltage < 0.1 VDC
Max. output current per channel
 100 A
Switching-on delay < 100 s
Switch off delay < 100 s
Maximum breaking energy of outputs
(inductive load)
1 Joule/channel