Eaton XN300 - 25.3 Wiring topic

25 Analog input module XN-322-8AI-PTKT
25.3 Wiring topic
XN300 slice modules 02/24 MN050002EN Eaton.com 182
25.3 Wiring topic
Two analog inputs can be wired to each of the four X1 to X4 connectors.
Two-wire configuration is supported.
When using a 2-wire configuration, the resistance value between pins 1+
and 1- will be measured and interpreted as a temperature reading. The cable
resistance will affect the reading in the form of an error. The advantage of
using this type of configuration is the fact that it requires a small number of
connection cables.
R
T
= Resistance of temperature sensor
Figure 103: Wiring diagram for two-wire connection for eight analog inputs
PE
0 V
24 V

1+ 1-
2-
2+
X2X1
R
T
R
T
3+ 3-
4-
4+
R
T
R
T
X3
5+ 5-
6-
6+
R
T
R
T
X4
7+ 7-
8-
8+
R
T
R
T