Eaton XN300 - 25.4 Technical specifications

25 Analog input module XN-322-8AI-PTKT
25.4 Technical specifications
183 XN300 slice modules 02/24 MN050002EN Eaton.com
25.4 Technical specifications
25.4.1 Specifications for analog resistance / temperature inputs
25.4.2 Measuring ranges for temperature inputs
The values will be represented as a decimal value in °C with one or two
decimal places in 1/10 °C. When the resistance type is selected, the value
will be shown as a decimal value in 1/10 . The measurement range can be
configured, e.g., with SDOs 0x5210 to 0x5217 for CANopen, please refer to
 Section “25.7 Memory layout”, page 186.
Number of analog input channels 8
A-D converter resolution 16 bits
Resolution 0.1 °C / LSB or 0.1 / LSB
Configurable parameters Pt1000,
KTY10-62, KTY11-62, KTY81-110, KTY81-120,
KTY81-150, KTY81-121, KTY81-122
Typical measuring current < 330 A
Reading update 1 ms
Input resistance > 30 k
Input filter
Built-in 1 kHz, third-order low-pass filter
parameterizable Yes; refer to  Table , page 185
Cumulative error ±0.75% of full scale value
status display LEDs green, yellow
SDO value
for sensor
type
Catalog
Number
Temperature range Resistance range Resolution in
°C
0Pt1000-50…+150 °C 803.1…1573.3  1/10
8 Pt1000
extended
(FW  01.20)
-150…+850 °C 397.2…3904.8  1/10
1KTY10-62
KTY11-62
-50…+150 °C 1035.9…4575.3  1/10
2 KTY81-110
KTY81-120
KTY81-150
-55…+150 °C 490.0 … 2211.0  1/10
3 KTY81-121 -55…+150 °C 485.0 … 2189.1  1/10
4 KTY81-122 -55…+150 °C 494.9 … 2233.0  1/10
6Resistance– 350…4600  –