Eaton XN300 - Page 210

27 Analog output module XN-322-4AO-UI
27.6 Memory layout
XN300 slice modules 02/24 MN050002EN Eaton.com 206
0x31E0
–
0x6xxD
SUB 01
2 Status register
Modules Diagnostics
Bit 0 Edge limiting for analog output 1 0x0030
Bit 1 Edge limiting for analog output 2
Bit 2 Edge limiting for analog output 3
Bit 3 Edge limiting for analog output 4
Bit 4 Temperature > 142 °C, analog
output 1
Bit 5 Temperature > 142 °C, analog
output 2
Bit 6 Temperature > 142 °C, analog
output 3
Bit 7 Temperature > 142 °C, analog
output 4
Bit 8 Overcurrent at analog output 1
(voltage) Excessive voltage at
analog output 1 (current)
Bit 9 Overcurrent at analog output 2
(voltage) Excessive voltage at
analog output 2 (current)
Bit 10 Overcurrent at analog output 3
(voltage) Excessive voltage at
analog output 3 (current)
Bit 11 Overcurrent at analog output 4
(voltage) Excessive voltage at
analog output 4 (current)
Bit 12 Unable to read calibration data
Bit 13 Invalid calibration data (CRC
error)
Bit 14 DC OK on DAC
Bit 15 Offset times had to be corrected
0x4001 – 0x9xx0
SUB 08
max.10 CAN:SerialNumber
EC:Serialnumber
–
0x4004 – 0x8001
SUB 01
1 UserLEDControl –
0x400C – –
Max.
25
ProductName –
0x41E0 – 0x8xx6
SUB 01
4 OutputChannelConfig 0: deactivated
1: -10 V to +10 V voltage outputs
2: 0 to 10 V voltage outputs
3: 0 to 20 mA current outputs
0x0048
CAN
Object
Index
Default
CAN
Mapping
EtherCAT
Object
Index
Size
(byte)
Local I/O
description
Local I/O
addresses