Eaton XN300 - 28.3 Wiring topic; 28.4 Technical data for analog outputs

28 Analog output module XN-322-8AO-U2
28.3 Wiring topic
XN300 slice modules 02/24 MN050002EN Eaton.com 210
28.3 Wiring topic
Two analog outputs can be wired to each of the four X1 to X4 connectors.
Figure 114: Connection diagram for analog outputs
28.4 Technical data for analog outputs
X1

PE
24 V
0 V
1+ - 2+ -
X2
3+ - 4+ -
X3
5+ - 6+ -
X4
7+ - 8+ -
X5
24V 0V
F1
Number of analog channels 8
Measuring range V
-10 … +10
Measured value m V -10,000 … +10,000
D-A converter 12 Bit
Resolution mV/LSB 5
Internal module refresh time ms 1
Min. load resistance k > 5
Max. capacitive load nF
100
Short circuit protection
yes (max. 1 minute)
Accuracy
Cumulative error % ±0.5