Eaton XN300 - 31.4.6 Filtering; 32 XN-322-8 AIO-I analog input;output module

31 XN-322-4AIO-I analog input/output module
31.4 Technical specifications
239 XN300 slice modules 02/24 MN050002EN Eaton.com
31.4.6 Filtering
The low-pass cutoff frequency can be individually configured for each input
channel using the appropriate register. This cutoff frequency is specified in
Hz without any decimal places.
The following settings are valid:
Low-pass cut-off frequency Register value
Filter disabled (default) 0x0000
1 Hz 0x0001
10 Hz 0x000A
25 Hz
0x0019
50 Hz
0 x0032
100 Hz 0x0064
250 Hz 0x00FA
500 Hz 0x01F4
1000 Hz 0x03E8