Ebac 4650e - Dehumidifier Settings and Controls Continued; Selecting Different Modes; Using the Laundry Mode; Using the Target Mode

Press the MODE button (1) to cycle
through the available modes
Although we recommend using SMART mode to regulate
the humidity other options available include LAUNDRY
mode (7) TARGET mode (10) and BOOST (12).
SELECTING DIFFERENT MODES
Press the MODE button (1) to cycle to
LAUNDRY mode and the laundry symbol
(7) will illuminate
The unit is now set to operate at the highest fan speed and at
optimal capacity for clothes drying It automatically changes
to SMART mode after 8 hours operation.
USING THE LAUNDRY MODE
Press the MODE button (1) to cycle to
BOOST mode
The unit is now set to continuously operate at the highest
fan speed and at maximum capacity.
USING BOOST MODE
Press the MODE button (1) to cycle to
TARGET mode and the TARGET symbol
(10) will illuminate and the digtal display
will flash.
Use the left and right buttons (3)(4)
to adjust the target humidity.
The unit is now in TARGET mode. The dehumidifier will operate
until the target humidity is reached.
When the target humidity has been set for 3 seconds the
display will revert to displaying the current humidity. To display
the target humidity in target mode press the mode button (1).
To leave target mode press MODE button (1) twice.
USING THE TARGET MODE
Settings & controls cont.
10
Target mode should only be used to maintain a specifc
humidity, Smart mode should be in all other instances.