Press the POWER button (2)
The STANDBY light (13) will now be illuminated orange; the
unit is now in STANDBY mode.
SWITCHING UNIT TO STANDBY
Press the FAN button (4) to cycle through
the fan speeds
The fan symbol (6) will flash slowly or fast.
CHANGING THE FAN SPEED
The filter change icon indicates that the
filter is ready to be changed.
On changing the filter the ‘fan’ button needs to be pressed
for 4 seconds to turn off/ reset the indicator.
FILTER CHANGE
NIGHT mode can only be activated by
the app.
On activation of NIGHT mode the unit runs at reduced fan
speed.
USING NIGHT MODE
Press and hold the TIMER button (3) to
cycle through the options. Use to scroll.
Select 0hrs option to operate
continuously (without timer)
The timer function dictates how long the unit will operate.
The order the times will cycle through is as follows:
1hr - 2hrs - 3hrs - 4hrs - 5hrs - 6hrs - 7hrs - 8hrs - 0hrs
If modes are switched the timer will still operate unless
reduced to 0hrs
USING THE TIMER FUNCTION
Settings & controls cont.
11
To Next Page
Loading...
