Settings & controls
Please refer to the image above when numbers are indicated within the instructions
Stand your dehumidifier upright for a minimum of 2 hours before switching on.
Remove the bucket and plug the
unit in
Note that the red bucket icon (15) is illuminated to indicate
that the water bucket is not present. Note the same icon
will also illuminate to indicate that the bucket is full.
SWITCHING ON YOUR DEHUMIDIFIER
Place the bucket in the unit and
close the door
The SMART icon (9) will now be illuminated blue; the unit is
now operating and running in SMART mode.
We recommend that you use this setting permanently
unless you have a problem with damp or would like to dry
laundry (see ‘Using the Laundry Drying Mode’ section).
The digital display (8) is also illuminated to show the
relative humidity.
3
4 7
6
5 8 12 14
9
10
11
13 15
2
4
1
MODE
9
To Next Page
Loading...
