Eberg ELIO E35T1 - Advanced Appliance Operating Modes; Turbo Function Activation and Operation Details

ELIO EN
48
www.eberg.eu
COOL mode
Ideal for hot muggy weather when you need to cooling and dehumidify the
room
To set this mode correctly:
Press the button anumber of times until the symbol appears.
Select the target temperature18°C-32°C (64°F-90°F) by pressing the or
button until the corresponding value is displayed.
Select the required fan speed by pressing the button.
Three speeds are available: High/ Low / Auto.
The most suitable temperature for the room during the summer varies from 24°C to 27°C(75°F
to 81°F ). You are recommended, however, not to set a temperature much below the outdoor
temperature. The fan speed dierence is more noticeable when the appliance is under FAN mode
but may not be noticeable under COOL mode.
FAN mode
When using the appliance in this mode, the air hose does not need to be
attached.
• Press the button anumber of times until the symbol appears.
• Select the required fan speed by pressing the button.
• Two speeds are available: High/ Low.
DRY mode
Ideal to reduce room humidity (spring and autumn, damp roomsrainy periods,
etc).
In dry mode, the appliance should be prepared in the same way as for cool mode,
with the air exhaust hose attached to enable the moisture to be discharged
outside.
To set this mode correctly:
• Press the button anumber of times until the symbol appears.
• In this mode, fan speed is selected automatically by the appliance and can not be set
manually.