Eberspächer EasyStart Timer - HEATING OFF WITH SHORTPRESS; CHANGE THE TEMPERATURE SETPOINT AND; OR THE OPERATING TIME DURING OPERATION

12 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
RESETTING TO AS-DELIVERED CONDITION –
ITEM 5:
Use the
or button to select Item 5.
5: Default
SERVICE
Press the button to confirm the selection.
5: Default
SERVICE
Press the button to confirm the selection.
INIT
Following the automatic detection the cur-
rent time and the current weekday must be
entered.
Then the Start display appears.
SETTING THE LANGUAGE – ITEM 8:
Default: DE
Use the
or button to select Item 8:
and confirm by pressing the button.
Use the
or button to select the lan-
guage DE or EN.
3 STARTUP / CONFIGURATION
8: DE
SERVICE
8: EN
SERVICE
Press the button to confirm the selection.
SELECT DEPARTURE TIME OR START TIME –
ITEM 10:
Default: “Off” for departure time
Use the
or button to select Item 10:
and confirm by pressing the button.
Use the
or “Off” button for the
departure time or “On” to select the start
time.
10: O
SERVICE
Departure time
10: On
SERVICE
Start time
Press the
button to confirm the selection.
After confirming you must reset the system by
removing the 5 A fuse.